Scientific Dust Collection Unit

HDPE Plastic Dust

Scientific Dust Collectors



Back to Air Filtration
Back to Part Numbers Page
Home


Plastic Dust Collector Application Notes:

Manufacturer of High Density Polyethylene (HDPE) plastic roof vent panels collects dust from numerous miter saws, chop saws, edge trimmers and plastic scrap grinders located throughout the facility. Larger pieces of plastic scrap from a few of the machines are ground and collected for recycling through a series of two cyclones.

The fine dust collected in the Scientific Dust Collector is very light and laden with static electricity. The wide bag spacing inherent in the design of all Scientific Dust Collectors minimized problems with material bridging between bags. Very low internal "can" velocities allows the light dust to settle out into the hopper more easily. Grounded bags were used to reduce the effects of static electricity.

Application:

HDPE Plastic Dust

Collector Model:

SPJ-84-X4B8
Fabric Collector w / Bottom Bag Removal

Air Volume:

6,500 ACFM

Air-to-Cloth Ratio:

8.2 to 1




Request Information Home Contact Us


Visit our other sites: jbii.com, jbsystemsusa.com
solventrecoveryusa.com, vacuumpumpusa.com,
water-filtersystems.com, wastewater-filtration.com,
liquidfiltration-products.com
, oilandfuel-filtration.com


© 2011 JB Systems, Inc. | 110 Corporate Park East Dr. | LaGrange, GA 30241
(706) 884-3006 | Fax: (706) 884-3067 | Toll Free: 1-800-868-6204
E-Mail: sales@jbsystemsusa.com

Privacy Policy