Tramp Champ Self-Cleaning Oil / Water Separators are a key
component of many successful recycling programs


Self-Cleaning Oil / Water Separators
Fluid Management / Fluid Recovery / Waste Minimization
Coolant Recycling System
Back to Coolant Recovery
Home

Since Porter Systems began to help industrial plants improve fluid management efficiency in 1971, the following basic waste minimization strategy has become universally recognized
  • Minimize waste wherever possible.
  • Do not have water, aqueous solutions or emulsions hauled away for disposal as hazardous waste.
  • Recycle everything possible, particularly water.

To achieve your waste minimization goals, choose from the following broad selection of Porter Systems equipment.

LifeGuard Coolant Recycling System

An extremely cost effective and operator friendly coolant and washwater recycling system. This system automatically removes suspended fines, separates tramp oils, accurately blends fresh concentrate with water and adds the mix as amke-up to the recycled fluid. Benefits include reduced disposal volumes of up to 95% and reduced concentrate purchases by 50% or more. Maintenance requirements are extremely low.

LifeGuard Coolant Recycling System

Servi-Sump Cleaner

The powerful Servi-Sump Cleaner is the ideal tool for keeping machine tool sumps in clean and fresh condition. Incorporating an effective filter basket, these units frequently serve as the mirst module in a batch type recycling system. In many cases they provide all the filtration that is required. They are available in several sizes with isngle or two compartments and the power options include: electric, LP gas or compressed air. Mobility ranges from manual to several choices of self propulsion.

Servi-Sump Cleaner

Super Servi-Sump Portable Recycling System

This machine answers the demand for a sump cleaner that also has tranmp oil removal capability. The unit has two tanks with the dirty tank incorporating the standard Servi-Sump filter basket. The clean tank receives the coolant after it is cycled throught the High Speed Centrifuge. The clean tank receives the coolant after immediately available to refill a clean coolant reservoir so the machine toool experiences minimal downtime.

Super Servi-Sump Portable Recycling System

ELiminator Proportioner

This dependable, positive displacement blending device accurately and throughly mixes soluble or synthetic concentrates with water to provide a uniform fluid mix. The unit is powered by plant water pressure and will provide a continuous supply of accurately mix fluid independent of water pressure variation or concentrate viscosity. Mixture ratios obtainable range from 4:1 to 130:1.

Eliminator Proportioner

Tote-L Mix Two Tote Fluid Mixing and Delivery System

The Tote-L Mix Station is designed to automatically mix water extendable metal working lubricants and water and deliver the mixture to the point of use through your piping system. The System uses two totes, a proportioner mixer, delivery pump and controls to make an independent means to automatically mix and supply coolant. Because the Tote-L Mixing Station is built on a containment tank, it assists end users with their IOS 14000 compliance.

Tote-L Mix Two Tote Fluid Mixing and Delivery System

Canister Filtration

Portable or stationary filtration systems to remove contaminants as low as 1 micron. These systems can increase the life span of all kinds of petroleum based lubricants, hydraulic oils, etc., as well as aqueous coolants dramatically reduce the volume of your hadardous waste streams.

Canister Filtration


Request Information Home Contact Us


Visit our other sites: jbii.com, jbsystemsusa.com
solventrecoveryusa.com, vacuumpumpusa.com,
water-filtersystems.com, wastewater-filtration.com,
liquidfiltration-products.com
, oilandfuel-filtration.com


© 2011 JB Systems, Inc. | 110 Corporate Park East Dr. | LaGrange, GA 30241
(706) 884-3006 | Fax: (706) 884-3067 | Toll Free: 1-800-868-6204
E-Mail: sales@jbsystemsusa.com

Privacy Policy