Porter Fluid Management / Fluid Recovery / Waste Minimization


Self-Cleaning Oil / Water Separators
Fluid Management / Fluid Recovery / Waste Minimization
Coolant Recycling System
Back to Liquid Filtration
Home

Since Porter Systems began to help industrial plants improve fluid management efficiency in 1971, the following basic waste minimization strategy has become universally recognized
  • Minimize waste wherever possible.
  • Do not have water, aqueous solutions or emulsions hauled away for disposal as hazardous waste.
  • Recycle everything possible, particularly water.
To achieve your waste minimization goals, choose from the following broad selection of Porter Systems equipment.



LifeGuard Coolant Recycling System

An extremely cost effective and operator friendly coolant and washwater recycling system. This system automatically removes suspended fines, separates tramp oils, accurately blends fresh concentrate with water and adds the mix as make-up to the recycled fluid. Benefits include reduced disposal volumes of up to 95% and reduced concentrate purchases by 50% or more. Maintenance requirements are extremely low.

LifeGuard Coolant Recycling System



Servi-Sump Cleaner

The powerful Servi-Sump Cleaner is the ideal tool for keeping machine tool sumps in clean and fresh condition. Incorporating an effective filter basket, these units frequently serve as the first module in a batch type recycling system. In many cases they provide all the filtration that is required. They are available in several sizes with single or two compartments and the power options include: electric, LP gas or compressed air. Mobility ranges from manual to several choices of self propulsion.

Servi-Sump Cleaner



Super Servi-Sump Portable Recycling System

This machine answers the demand for a sump cleaner that also has tramp oil removal capability. The unit has two tanks with the dirty tank incorporating the standard Servi-Sump filter basket. The clean tank receives the coolant after it is cycled through the High Speed Centrifuge. The clean tank receives the coolant after immediately available to refill a clean coolant reservoir so the machine tool experiences minimal downtime.

Super Servi-Sump Portable Recycling System



Eliminator Proportioner

This dependable, positive displacement blending device accurately and thoroughly mixes soluble or synthetic concentrates with water to provide a uniform fluid mix. The unit is powered by plant water pressure and will provide a continuous supply of accurately mix fluid independent of water pressure variation or concentrate viscosity. Mixture ratios obtainable range from 4:1 to 130:1.

Eliminator Proportioner



Tote-L Mix Two Tote Fluid Mixing and Delivery System

The Tote-L Mix Station is designed to automatically mix water extendable metal working lubricants and water and deliver the mixture to the point of use through your piping system. The System uses two totes, a proportioner mixer, delivery pump and controls to make an independent means to automatically mix and supply coolant. Because the Tote-L Mixing Station is built on a containment tank, it assists end users with their IOS 14000 compliance.

Tote-L Mix Two Tote Fluid Mixing and Delivery System



Canister Filtration

Portable or stationary filtration systems to remove contaminants as low as 1 micron. These systems can increase the life span of all kinds of petroleum based lubricants, hydraulic oils, etc., as well as aqueous coolants dramatically reduce the volume of your hazardous waste streams.

Canister Filtration


Request Information Home Contact Us


Visit our other sites: jbii.com, jbsystemsusa.com
solventrecoveryusa.com, vacuumpumpusa.com,
water-filtersystems.com, wastewater-filtration.com,
liquidfiltration-products.com
, oilandfuel-filtration.com


© 2011 JB Systems, Inc. | 110 Corporate Park East Dr. | LaGrange, GA 30241
(706) 884-3006 | Fax: (706) 884-3067 | Toll Free: 1-800-868-6204
E-Mail: sales@jbsystemsusa.com

Privacy Policy