Dekker - Titan Series Single-Stage Liquid Ring
Large Capacity Vaccum Pumps



Model Number 2K-DV04002K-K

Introducing the Dekker - Titan series single-stage liquid ring large capacity vacuum pump. The large capacity vacuum pump is built to rigid quality standards. It has only one moving
part making it more reliable and insuring very minimal maintenance. The pump can handle large amounts of condensable vapors which enhances the performance
significantly.


single-stage liquid ring
monoblock vacuum pumps.
single-stage liquid ring
bare-shaft/pedestal vacuum pumps.
single-stage liquid ring
large capacity vacuum pumps.
two-stage liquid ring
vacuum pumps.

Back to Vacuum Pumps Home


  • Reliable heavy-duty design, built to rigid quality standards.
  • Variable discharge port enables pumps to operate at maximum efficiency over the entire vacuum range.
  • Shaft sleeves are standard, virtually eliminating the possibility of shaft wear.
  • Available in different materials to suit your application.
  • Standard sealing is packed gland, mechanical seals available.
  • Heavy duty bearings mounted external to the pumping chamber, eliminating poetential bearing failure due to process contamination.
  • Low operating speeds ensure an extended life cycle.
  • The pump can handle large amounts of condensable vapors which enhances the performance significantly.
  • No metal-to-metal contact, only one moving part.
  • The pumps can handle carry-over of liquids and/or soft solids without causing damage to the internal parts.
  • The design allows operation with various seal fluids.
  • Low operating noise levels are in the 75 - 85dBA range.





Materials of construction / Seal code
Mat. code
3
4**
7*
8*
11
14
Casing
CI
316 SS
CI
NA
CI
304SS
Portplate
CI
316 SS
CS
NA
CI
304SS
Impeller
316 SS
316 SS
CS
NA
304SS
304SS
Shaft
CS
316 SS
CS
NA
420SS
304SS
Seal code
P***
P***
P***
P***
P***
P***


CI = Cast Iron DI = Ductile Iron CS = Carbon Steel

304SS = AISI 304 Stainless Steel
316SS = AISI 316 Stainless steel
420SS = AISI 420 Stainless Steel
* standard material pumps protected by 420 SS shaft sleeves
** 316 SS pumps protected by 316 SS shaft sleeves
*** P Standard seal is packed gland, other seal materials available.

Performance characteristics

Nominal capacity:
2400-4000CFM
Motor Range:
125-250 HP
Speed Range:
420-660RPM
Maximum vacuum:
24"Hg/150Torr
Weight (bare-shaft):
4840 Lbs/2200kg
Max. gas inlet temp:
212oF/100oC
Noise level (at 3ft):
75-85dBA



Request Information Home Contact Us


Visit our other sites: jbii.com, jbsystemsusa.com
solventrecoveryusa.com, vacuumpumpusa.com,
water-filtersystems.com, wastewater-filtration.com,
liquidfiltration-products.com
, oilandfuel-filtration.com


© 2011 JB Systems, Inc. | 110 Corporate Park East Dr. | LaGrange, GA 30241
(706) 884-3006 | Fax: (706) 884-3067 | Toll Free: 1-800-868-6204
E-Mail: sales@jbsystemsusa.com

Privacy Policy