HARMSCO

Up-Flow Cartridge Filtration



Activated Carbon Cartridges
Standard Filter Housings
Filter Cartridges
Back to Water Filtration

Hurricane Filters
UP Flow Cartridge
Test Results
Home



A design so superior it's patented!


Harmsco Up-Flow Cartridge Filters outperform conventional filter designs because the outlet is located above the inlet to eliminate air entrapment during operation. With Up-Flow filters, liquid enters the vessel through the inlet, located at the bottom of the filter.  As the liquid vessel through the inlets, located at the bottom of the filter.  As the liquid travels upward, it flows though the filter media, past the top seal, separating the dirty and clean water chambers, and down the  standpipe as it exits the filter.  Because the top of the standpipe is located above the top seal, air is self-purged from the filter to eliminate vents and improve filtration efficiency. 

Rugged stainless steel construction

Harmsco Up-Flow Filters are made of low carbon 304 stainless steel for durability and long equipment life

Electro-polished for increased resistance to corrosion

All stainless steel components are electro-polished for a superior finish and increased durability.

Wing nuts

Wing nuts are used so no tools are required.  Finger tight is generally sufficient. Hex nuts are recommended with 75 foot lbs. of torque above 100 psi.

Up Flow Cartridge Filter

Individual studs for safe, secure lid closure

We have the safest lid in the business with individual studs for optimum security.No v-clamps with only one bolt to secure lids.

Pressure rated and hydrostatically tested

All filters are pressure rated to 150 psi (10 bar) and hydrostatically tested.

Easy cartridge installation, removal and service

Our 7, 14, 16, 21 and 24 cartridge models have all cartridges arranged in a single cartridge cluster for easy installation, removal and service. This makes maintenance a snap!


Internal View of Potential for by-pass Harmsco Up-Flow Cartridge Filter

Internal view of No air EntrapmentInternal View of No by-pass during service

Potential for by-pass

With outlets located below inlets, by-pass can occur as unfiltered liquid drains downward to the sump while the cartridges are removed. This may result in by-pass when the filter is put back into service.

 

No air entrapment

Air is self purged from Harmsco Up-Flow filters because outlets (top of standpipes) are at the high point of the filters.

 

No by-pass during service

No liquid can by-pass Harmsco filters during servicing because standpipes are the "clean side" of the filter

 

 



Request Information Home Contact Us


Visit our other sites: jbii.com, jbsystemsusa.com
solventrecoveryusa.com, vacuumpumpusa.com,
water-filtersystems.com, wastewater-filtration.com,
liquidfiltration-products.com
, oilandfuel-filtration.com


© 2011 JB Systems, Inc. | 110 Corporate Park East Dr. | LaGrange, GA 30241
(706) 884-3006 | Fax: (706) 884-3067 | Toll Free: 1-800-868-6204
E-Mail: sales@jbsystemsusa.com

Privacy Policy





















part numbers
hif hif 100 hif 200fl hif 42 hif 75 hif 150fl hif 7 hif 14 his 16 hif 24
HB-20-0.35w HB-20-1W HB-20-5W HB-20-20W HB-20-50W 801-1HT 801-5HT 801-20HT 801-50HT Hur 90 ASME
HUR 170 ASME HUR 850 ASME PFS-1-P PFS-2-P PFS-3-P PFS-4-P PFSS-2-P PFSS-3-P HUR 40 HP HUR 90 HP
HUR 170 HP HIF 7SS HIF 7SS-222 HIF 14SS HIF 16SS HIF 21SS HIF 24SS WBAC-1--W HSBAC-10-W HAC-20-W
PP-D-1 PP-HC/170-1 PP-S-1 PP-D-1 PP-20E-1 PP-T-1 PP-BB-10-1 PP-HC/40-1 PP-BB-20-1 PP-HC/90-1
PP-HC/170-1 HSL-10-0.25W HSL-10-0.375-W HSL-10-0.75-WPR HSL-10-0.75-WCP HSL-10-0.75-222 HSL-20-0.75-WRP HCT-100 HUC-200 HBB-10-1-WPR
HAC-20-W HAC-BB-10-W HAC-BB-20--W HAC-10-LR-W hif 100 HB-10-0.35W HB-10-1W HB-10-5W HB-10-20W HB-10-50W
PP O-RING

hif